Product Review
Polaris RZR Airbox Cover
Information:
EHS Racing
universal filter cover with double plate
Here is a picture of the stock RZR airbox chamber.
Although the hole is pretty large, the bed plastic covers all but a small
gap at the bottom (see arrow).
Installation:
Disassemble EHS Racing cover so you can use the bottom plate as a template
for where to cut/drill.
I cut the hole a bit too high. The top two bolt holes ran into the air
box. Lowering it about 1/2" from what I did would be about right.
Install rubber gasket and first plate.
Install Outerwears and second plate.
Conclusion:
This is a great way to increase airflow to the engine
without sending all kinds of dirt to your air filter. Finished installation
takes advantage of the airbox opening. Installation takes about 1/2 hour and
the finished product looks great.
Contact Info:
EHS Racing
1975 N US 1
Rockingham, NC 28379
Website: www.ehsracing.com
Email:
sales@ehsracing.com
Phone: 866-997-2345
| 
