Take the stress out of loading your ATV or UTV in the back of a lifted truck

LongATVRamps.com has that all figured out with long ramps that fold in half for easy hauling, but with the strength needed to safely load into the back of a truck. The ramps are made very well and are priced so it is a no-brainer.

LongATVRamps.com specialize in long, lightweight ramps which allow you to safely load your ATV or UTV into a truck, flatbed or tall trailer.

The ramps are made from 6061 aluminum weigh about 28 lbs each. The ramps are 9.5 ft. long and 15 in. wide, but fold to just 64 inches.

When loading your UTV, remember to drive up in 4WD/Low and ALWAYS use a tie down ratchet or cam buckle strap to avoid ramp kickout.

The ramps are 15 in. wide with 3" angle side walls keeps tires inside.

The ramps fold in the middle with plenty of material to hold the weight of a UTV and are setup to maintain an arc for added strength.

The 9.5' ATV Ramps will support up to 1000 lbs per ramp or 2000 lbs per set.

Contact Info:

LongATVRamps.com

Website: www.longatvramps.com
Phone: 888-284-1280